QSM-1D / Precision positioning

Place the beam. Precisely.

Single-axis synchronized mirror and actuator arrays for deterministic positioning, stable holds and step-and-settle scanning.

Application-specific configuration
Still from the four-mirror QSM-1D demonstration
Still from the four-mirror QSM-1D demonstration
1 axisDeterministic positioning
8:1Actuators per mirror in demo
FlexibleMirror-to-actuator mapping
THE APPROACH

Designed around
the application.

QSM-1D has a synchronized mirror array driven by a separate synchronized actuator array. Unlike the resonant mirror–actuator units used in IFM and ISM, these two arrays can differ in size: several actuator units can drive one mirror element. Small mirrors reduce rotational inertia, while combined actuator force supports the design goals of low-voltage positioning, fast response and stable holds. An actuator array can also drive a single larger mirror when the application calls for it.

01

Move, then hold

Quasi-static control supports non-periodic motion, slow ramps, region-of-interest scans and point-to-point stepping.

02

Independent array sizing

Size mirror and actuator arrays separately to balance optical aperture and available actuation force.

03

Add feedback when needed

Optional angle sensing supports closed-loop control. Aperture and coatings can be configured for visible or infrared applications.

SEE THE DEVICE IN ACTION

From principle
to motion.

Explore QSM-1D through device and optical demonstrations. Refer to the technical overview below for specifications and development status.

View specifications ↓
QSM-1D · Device demonstrationLoop

Smooth positioning. Stepped motion.

Four synchronized mirrors, each driven by eight synchronized comb actuators, demonstrate smooth tilt followed by point-to-point stepping. This is the published demonstration configuration, not a fixed requirement for every QSM-1D device.

Visual demonstration · No audio
QSM-1D · Laser steering demonstrationLoop

Watch the beam follow the mirror

A red laser illuminates the QSM-1D mirror, and the reflected spot moves across a paper screen behind the device. This original demonstration makes the steering response visible using the same eight-actuator-per-mirror configuration. The footage illustrates motion rather than a numerical settling-time or positioning measurement.

Visual demonstration · No audio
APPLICATION POSSIBILITIES

Put the beam
where it matters.

Deterministic angle control supports step-and-repeat positioning, selected-region scans and slow ramps. These are application examples to scope around your optical system.

Imaging & instrumentation

Slow-axis scanning for confocal and multiphoton imaging, beam placement for optical coherence tomography (OCT), light-sheet positioning, fiber coupling and laser-therapy alignment.

Sensing & LiDAR

Region-of-interest scanning, beam pointing, boresight alignment and calibration during operation.

Research & manufacturing

Optical metrology, spectrometer coupling, probe alignment and stabilization loops.

CONFIGURATION OPTIONS

Size the actuation.
Shape the motion.

QSM-1D is a general-purpose building block for optical benches and integrated systems. Share your scan pattern, travel range and thermal envelope so we can scope the mirror and actuation under NDA.

Several actuators per mirror

Synchronize multiple actuator units to drive one mirror element when the application calls for higher torque or lower drive voltage. The eight-to-one mapping in the videos is one example.

One-to-one tiles

Use matched actuator and mirror elements for modular scaling across an optical line.

Hybrid two-axis scanning

Pair QSM-1D as the slow or positioning axis with a resonant fast-axis scanner to form a two-dimensional system.

TECHNICAL OVERVIEW

QSM-1D
in detail.

The published demonstration illustrates an eight-to-one actuator-to-mirror mapping. No standardized numerical performance table is published; requirements should be discussed for the intended configuration.

Applications

  • Optical instrumentation
  • Beam alignment
  • Region-of-interest scanning
  • Metrology & research
QSM-1D published specifications and configuration
ParameterValue / notes
MotionSingle-axis, quasi-static
Published demonstrationFour synchronized mirrors
Demo actuationEight synchronized comb actuators per mirror
ConfigurationMultiple actuators per mirror, one-to-one tiles, or hybrid pairing
Angle sensingOptional for closed-loop control
Spectral optionsVisible or infrared; coating selected for the application
Aperture, travel and thermal requirementsConfigured for the application
NEXT STEPS

Let’s put your
optics in motion.

Start a conversation ↗